Here you'll find all our products

With a fabric weight of 165 gsm there are 200 pads in the bale, which is twice the number when compared to the heavier weight 286 gsm 100 pad count version, and as a results offers a lower cost per square metre product.

The pads are made from a single layer of meltblown which is sonically bonded together. The sonic bonding points makes the pad less prone to stray fibres becoming detached. This gives the pad a very even structure which also contributes to the pad’s good absorbency rate. These attributes help make the pad an industry standard construction because it offers all-round average performance but excellent versatility. The grey colour helps to hide any absorbed liquids.

Each pad is 40 cm x 50 cm (16" x 20") and features perforations 19 cm (7.5”) across. The pads can be supplied in either a rigid cardboard box, which also acts as a dispenser, or a clear plastic bag. 

Key Features

• The pad is made from a single layer of meltblown that is sonically bonded together.
• Good value and reliable performance.
• Made from high quality polypropylene.

An economical choice for everyday Maintenance situations of absorbing either oil or water-based fluids. This is an excellent go-to-product for lighter duty indoor MRO tasks. Because the pad is Maintenance, only use indoors.

• Fire retardant as per ASTM 726.
• Ensure that disposal of these sorbents complies with all regulations.

Pollution Prevention Guidance

https://www.gov.uk/government/collections/pollution-prevention-guidance-ppghttps://

Construction and demolition site pollution prevention

https://www.gov.uk/government/publications/construction-and-demolition-sites-ppg6-prevent-pollution

Storing and handling drums

https://www.gov.uk/government/publications/storing-and-handling-drums-and-intermediate-bulk-containers-ppg26